Inspection before starting the fuel burning engine - Asphalt mixing floor burner

Inspection before starting the fuel burning engine

Inspection before starting the fuel burning engine
It is inevitable that the fuel burning engine will encounter problems in the process of use. In order to prevent such problems, what inspections should be done before the fuel burning engine is adjusted? Next, INCATON Environmental Protection will answer for you.
The atomization form and basic operating principle of the fuel burning machine. If alcohol oil is selected as the fuel, the alcohol oil burning machine can select mechanical atomization burner and material atomization burner according to the viscosity of the fuel oil. When the fuel is burned in the furnace of the radiation chamber of the combustor, high heat gas will be generated and used as a carrier to flow into the convection chamber and be discharged from the chimney.
The crude oil to be heated first enters the furnace tube of the convection chamber of the combustion engine. The furnace tube obtains heat energy from the gas passing through the convection chamber in the form of convection. This heat energy is transferred from the outer surface of the furnace tube to the inner surface of the furnace tube in the form of heat transfer, and in addition, it is transferred to the crude oil flowing in the tube in the form of convection.
There are several problems that may occur during the operation of the fuel burning machine, but proper adjustment should be made. You can return to the normal operation of the machine. The following will teach you some reasonable methods to adjust the fuel burning machine. Inspection before adjustment: check whether the diesel oil is in place, whether the fuel pipeline is clean and smooth, whether the valve has been opened, whether there is pipeline leakage, and whether the pipeline installation is effective. Whether the oil inlet and return pipelines are properly assembled. It is not allowed to assemble valves on the oil return pipelines. The detector can routinely check the flame signal, which is neither sensitive nor slow.